Heres a clip of a video i stumbled upon on another thread sorry for the repost...but i just had to start a new thread on the subject matter.

First, this pilot is a stud, as are all who have the skills to 3d a high winger!

Lake Havasu Float Fly 2008 - Dave Sullivan World Models 100cc 1/3 Clipped Wing Cub (3 min 40 sec)

Second, two of my friends built Balsa USA Cub Kits this past year, one 1/4 scale and one 1/3 scale. I do believe i will be witnessing some cubs at our field 3-Ding this year, cant wait!

I guess I was thinking that it would be cool to have a 3d Cub Flying Gallery Thread with setup essentials, radio tweaks, and flying tips for those who are getting into this unusual and perverse art form. Please post Pics if you got 'em and video is always good too!

Cubs rule!

yea i busted a nut lol when i saw that thing pull into the hover and start torqueing

I gots it's little brother!

The twin cylinders on that 100cc engine sticking out the sides of the cowl makes it look scale like also!!

Originally Posted by robbinsp

Heres a clip of a video i stumbled upon on another thread sorry for the repost...but i just had to start a new thread on the subject matter.

First, this pilot is a stud, as are all who have the skills to 3d a high winger!

Lake Havasu Float Fly 2008 - Dave Sullivan World Models 100cc 1/3 Clipped Wing Cub - YouTube

Second, two of my friends built Balsa USA Cub Kits this past year, one 1/4 scale and one 1/3 scale. I do believe i will be witnessing some cubs at our field 3-Ding this year, cant wait!

I guess I was thinking that it would be cool to have a 3d Cub Flying Gallery Thread with setup essentials, radio tweaks, and flying tips for those who are getting into this unusual and perverse art form. Please post Pics if you got 'em and video is always good too!

This is Dave Sullivan flying!

Originally Posted by Full Spool

I gots it's little brother!

Tell us more ??? Looks like a JC 30CC on there. What size Cub ?

Originally Posted by komrom

This is Dave Sullivan flying!

believe it! I thought he was just some muffler guru!

cool, finally something different!!

i hope someone who 3d's aeroworks and hemple cubs come on in here and post some pics/video.

this BUSA 1/3 cub Built and flown my Mr. Dave Boldt is a real nice piece of work. [A year or two worth of cigarettes and beer] as he would say. Great guy. anyhow it is covered in koverall and doped. tough stuff! Spouts a 3w 80 twin i believe - if memory serves me. Pics took at his annual funfly which is always a blast to attend. ive seen this thing hover and do knife edge loops. sure is a sight!

Originally Posted by gapple12

Tell us more ??? Looks like a JC 30CC on there. What size Cub ?

Yep it is! I am a dealer for world models and JC engines and I like to fly what I sell~!
My goal was to put in a jc30evo but it wouldn't fit so I put the jc23evo in it. The 23cc pulls the 1/4 cub
with authority ! I will post a video if we ever get a decent day to fly.

ill bet that jc 23 wont hover that 1/4 scale cub... i know my dle 20 wont hover my hangar 9 1/4 cub. it just slowly backs its self down. till you had better level it and get some air

Should have some pics of mine come spring. I will hover it. The DLE30 has plenty of power.

Originally Posted by rede2fly

ill bet that jc 23 wont hover that 1/4 scale cub... i know my dle 20 wont hover my hangar 9 1/4 cub. it just slowly backs its self down. till you had better level it and get some air

It may not, but I will find out lol. I only got 2 flights on this setup and they were very short flights because of time constraint. I am hoping this weekend to test its hover or at least tail slide capabilities.