Hey guys!
somebody have experiencse with the dymond d47s ?
how this servos?

thank you,
Dor

The best you can get. Outstanding for F3P-A and AM, no problem even with 2 Lipo direct.

Carl Olsson F3P-AM (2 min 21 sec)

http://www.youtube.com/watch?v=all21kX7Dgk
Carls Crewchief.
Lennart

Originally Posted by 3Dor.B

Hey guys!
somebody have experiencse with the dymond d47s ?
how this servos?

thank you,
Dor

Excellent servo fro the price.

you can even make it lighter if you want by removing the bottom case.

I have 30 of these and not a problem with any of them!!! Now all we need to do is find a great price, like $12.99


John

Where are they for 12.99?

Havent found them that cheap yet but I am on a mission LOL

OK!
thanks guys
i will get this servos

Dor

I have been running 3.3,3.7 and 4 gram servos in DW 28" foamies for awhile now and after buying 11 D 47's I can tell you that all those 4 gram and under servos are all junk that I have tried so far.I don't usually bash products that's why I didn't name brands. The D 47's are rated from 3.6 to 9.6 volts and they like to be hooked up directly to a 2 cell pack. The reason I will not use the under 4 gram servos is what good is a servo if it doesn't center perfectly every time. The D 4.7 gram servos do. The HS 55 and 56's are very good at centering , can be bought almost anywhere, and are better suited for 38 to 48" foamies. I learn something everyday in this hobby!!!

I was looking at these too, need a weight loss program for my DW Junior Yak!! Only thing I'm not sure of: will just one on aileron be strong enough??? 3/4 oz. is a lot on a 6oz plane. I tried to get HobbiesRUs to carry 1mm CF Rod, he just mumbled something and took a big drink!!! See you this weekend???? Bobo going Sunday.

Originally Posted by james.l.hill

I was looking at these too, need a weight loss program for my DW Junior Yak!! Only thing I'm not sure of: will just one on aileron be strong enough??? 3/4 oz. is a lot on a 6oz plane. I tried to get HobbiesRUs to carry 1mm CF Rod, he just mumbled something and took a big drink!!! See you this weekend???? Bobo going Sunday.

This plane was built for ETOC 2008 and has flown so much that you cant imagine.
Very hard flying for hours of training and competition, with one aileron servo all at two LiPo.
The only drawback, its a little slow even at hi Volt, but for us normal humans, it cant be a problem.
/ Lennart
Carls Crewchief
http://carlolsson.webs.com/

Carl_Olsson_AM_2009.wmv (2 min 19 sec)

Nice flying!

Ailerons look OK to me from that flight!!! You can connect Bat. (8.4V) directly to the servo????(bypass BEC?)

Originally Posted by james.l.hill

Ailerons look OK to me from that flight!!! You can connect Bat. (8.4V) directly to the servo????(bypass BEC?)

Yes no problem, there are different ways but I have done it this way, because I didnt want to destroye the servo contacts.
/Lennart