Pilot 92 inch with VVRC 70 twin...this was a four beer project!

Anyone have some inline twin examples to share?

Originally Posted by The Hodge

Looks awesome, wow you have done a stack!

So you have some Baffles glued to the cowl and other hung off the motor?

Yep. Just depends on the cowl and engine as to how far I want to take it and design needs for the easiest access once installed.

This might be a stupid question but how are the 3d printed baffles held in place? I cannot enlarge the pictures enough to see. I'm assuming they are fastened to the cowl in some way?
Thanks very much for all of the information, I need to put baffles on a couple planes but I can't ever get them to look or act correctly.

Originally Posted by gorilla81

This might be a stupid question but how are the 3d printed baffles held in place? I cannot enlarge the pictures enough to see. I'm assuming they are fastened to the cowl in some way?
Thanks very much for all of the information, I need to put baffles on a couple planes but I can't ever get them to look or act correctly.

Yes they are usually glued with Epoxy and fitted to the cowl inlets.

The Foam type can be done with epoxy or med/Thick CA.

EF Extra 300 104”

Used thin aircraft ply as a template and then used thin stamped diamond plate and bent it around my template.

Baffle pictures of my Dalton 300SP

Baffels on a FW-190 with a GT-80 powerplant.
Air is lazy it takes the path of least resistance.

Sparky

These are my Pitts' baffles.



https://www.youtube.com/watch?v=1_xHMdjb680

Here is the two planes that I have. The quad was a custom built Dalton 300ml and the other is the 115” AJ laser which was done with dative foam.

Originally Posted by GROOVEN J

Here is the two planes that I have. The quad was a custom built Dalton 300ml and the other is the 115” AJ laser which was done with dative foam.

What is “dative foam”?

Originally Posted by ghoffman

What is “dative foam”?

Darice foam. iPhone Auto corrected wrong. Lol

A couple pics of a Comp 330L with a 1 pc cowl and a DLE 111.

Darice foam and medium CA.

Here are mine on the AJ 123" Laser with a DA 200.
The entire system weigh about 5.8 oz.

Cheers
Adi Kochav

The baffle TBrum made for my DA200M in a Kam Aero and baffles I made with Creatology 6mm foam for my 101" Skywing Laser. The one Trevor made from carbon fibre and painted looks much better than my foam version but hoping both provide good cooling