Originally Posted by The Hodge

Speaking with BB im going to Try the H51-C, M43C & M92T models, The only reports of Glitching with JR thus far has been the H51B model, The Brushless models have different PCB and Circuit design, So it might be localized to that model.

Im looking into a Technical explanation why this could occur, Ie is it Signal speed, Frame rate relaited etc. Be nice to understand it.

Ill let you know how we go

The h51b v1 is brushless
The v1 glitched on several radio brands the h51b v2 has different firmware and works great

There was a Video and Reports of the H-51B V2 having this issues on the JR gear as well, But Appears all the Coreless Models are all ok

I have 8 of the Blue Bird BLS-M52B V1 for sale and I guess they are junk. because they are V1 Still a nice servo and best servo I owned.
I run Futaba and Frsky and they are perfect.
I am not a Spectrum fan. So I take these servos are no good no more.
Oh well.
I talked to people that had V1 and are running good.
Anyone have these and are still going?
I run everything on direct 2s lipo too.never had any problems with any servo I owned.

Originally Posted by shorte

I have 8 of the Blue Bird BLS-M52B V1 for sale and I guess they are junk. because they are V1 Still a nice servo and best servo I owned.
I run Futaba and Frsky and they are perfect.
I am not a Spectrum fan. So I take these servos are no good no more.
Oh well.
I talked to people that had V1 and are running good.
Anyone have these and are still going?
I run everything on direct 2s lipo too.never had any problems with any servo I owned.

Never had an issue with any of the m52 i have its the servo i use almost exclusively now. I have 1 plane with v1s and 3 with v2s still have 2 with h51 as well. All on spektrum

Originally Posted by scooby61

Never had an issue with any of the m52 i have its the servo i use almost exclusively now. I have 1 plane with v1s and 3 with v2s still have 2 with h51 as well. All on spektrum

I have 8 new servos for sale for I sold the plane that they were for.
Anyone want them.

They are sold.

Originally Posted by 49dimes

The 3114's are just a little lighter at 2.33oz verse 2.6oz for the 31A's. Makes a difference when you consider 9 servos in a 100cc class airframe. I also found the gear train to be very smooth and quiet
compared to Futaba 9157's. Have not seen Futaba BLS 157's in operation and at $200+ with shipping doubt that I will. Check out the Blue Bird web site(bluebirdmodel.com). The CEO of the company has been a diehard pattern boy since the 70's. This servo brand has been out there for some time. They use Japanese parts such as smt boards, motors etc.. and are manufactured in Tiwan (same as Futaba).

interesting, I just picked up some BB to try

How you get ahold of the Bluebird servo guy. Won’t answer phone or messages. Have some questions about servos. Is he sick or just too busy. Anyone know???

Originally Posted by ttaylor63

How you get ahold of the Bluebird servo guy. Won’t answer phone or messages. Have some questions about servos. Is he sick or just too busy. Anyone know???

Used to get quick replies from him but for the past 8 months or so, no replies at all.

MLT

Well somebody has to know what’s going on with Bluebird. Need some servos but not ordering till guarantee will get them.

Redwing rc sells them also.

I'd like to share my testing and results regarding 2022-early 2023 GP Ignitions creating random 51/52 series servo twitching. Now resolved by both GP early 2023 and Blue Bird past 10-2023. If you have a compatibility issue regarding servo twitching with the engine running, refer to my video that includes my nearly six months of troubleshooting. I learned a lot during this process and hope to share that knowledge! Enjoy!

GP Ignition interference with Blue Bird Servos Resolved! (10 min 26 sec)

Very interesting and excellent troubleshooting work!

Much appreciated - Thank you!

Nice work Nick!

Awesome troubleshooting and great explanation with good recommendations!