Originally Posted by purpleheartrc

Hey Neil4, was wandering if you have any baffles for 93" laser with DA-70

Sent you a PM - 93" AJ Laser baffles are not available at this time.

Best regards,

Neil

I have the Solidworks Flow simulator working on the baffles. I went to the class on this a few weeks ago. Here is the cross section of the 94 MXS short side baffle. Of course the pressure is highest on the side with the most angle change.

Here is a velocity plot. The air flow velocity is highest at the cylinder head, near the spark plug, which is where it should be. The round inlet is at the right, and the outlet towards the fins is left.

Here is the flow, animated. The red is faster...

MXS animated video flow. (0 min 9 sec)

Originally Posted by Neil4

Joseph,

Thank you for your post.

No, at this time I do not make baffles for the 105" H9 300 - If there is enough demand I will be happy to put it on my list of future baffle offerings .

Best regards,

Neil

Hi Neil, same plane and motor ( DA 120 ), i would be interested in a set of baffles.
Let me know!! Thanks!

I will if Neil will!

c'mon Neil PLEASE!!!