Great Planes 1/3 Scale Cap 580 Standoffs

Flyinrazrback · , 10:49 AM

Does anyone know what length standoffs are needed for a DA100 or 3W106/110? I am putting a GP123 in mine but need a baseline of what length standoffs are needed if I have the DA or 3W measurements that gives me enough to go on. Thanks!

FGNewbie · , 01:40 PM

measure from the firewall to the a few mm past the front of the cowl/hub, and then subtract the length of the engine. pretty straightforward.

Flyinrazrback · , 05:15 PM

Quote:

Originally Posted by FGNewbie

measure from the firewall to the a few mm past the front of the cowl/hub, and then subtract the length of the engine. pretty straightforward.

If I had the airplane or engine in my possession I would do that. Hence me asking if anyone knew right off hand.

10-17-2023, 10:49 AM #1
Flyinrazrback
Flyinrazrback Smoking a Blunt with Yoda Ft. Smith, AR Joined Jan 2006 2,764 Posts	Discussion Great Planes 1/3 Scale Cap 580 Standoffs Does anyone know what length standoffs are needed for a DA100 or 3W106/110? I am putting a GP123 in mine but need a baseline of what length standoffs are needed if I have the DA or 3W measurements that gives me enough to go on. Thanks!

Quick Reply
The following errors occurred with your submission

Okay
Message: Posting Quick Reply - Please Wait

10-17-2023, 01:40 PM #2
FGNewbie
FGNewbie Registered User United States, CA, Riverside Joined Mar 2010 6,421 Posts	measure from the firewall to the a few mm past the front of the cowl/hub, and then subtract the length of the engine. pretty straightforward.

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

FlyingGiants Message

Cancel Changes