i'm a new one here ,nice to meet you.

There is an error in the MVVS/Evolution 45 / 50
These engines only use three M5 bolts, at 26mm pitch circle, and M10x1 central bolt

Originally Posted by pe reivers

There is an error in the MVVS/Evolution 45 / 50
These engines only use three M5 bolts, at 26mm pitch circle, and M10x1 central bolt

Thank you. I'll correct this in the spreadsheet soon.

OK, I've uploaded the revised attachment to the first post of the thread.

Great list Robert! It is on my wall for reference.

What about BME 50, BME 102, 105 etc?

Originally Posted by Extra nuts

What about BME 50, BME 102, 105 etc?

If you have accurate info on these or any other engines, I welcome your input. I'll add them to the list as I receive them.

I was looking for a list like this when I started out with gassers but any info was hard to find and very sparse. This will be a great list for many people and not just newcomers.

Let add some electric motores too:

Plettenberg Terminator and Predator series equals to type 6 in your list (6 x Ø5, pattern Ø29, shaft Ø10)
http://www.plettenberg-motoren.com/U...ator/Masse.htm
http://www.plettenberg-motoren.com/U...ator/Masse.htm

Hi all
Would anyone have the pattern for a JCE 40cc ?

BME 44, 50, 100, 102,105 all have single bolt prop hubs unless they have been upgraded to the small da/3w 6 bolt pattern.

There was a member last night that was wondering about prop jig for a RCGF 100. Now, I can't find his post???

The RCGF 55 and 62 have the same bolt pattern as the DA 50's. I tried to dig up the proper documentation to back it up but was unsuccessful. Maybe, Robert, you might try to contact the guys at SERCE and they'll be able to provide more info on all their engines they sell. I have the 62cc and bought a drill jig for a DA 50 at the LHS and it worked perfectly. This is a great idea Robert, keep up the great work!!!

dle-170 same as da170

JCE 40 is the same pattern as DA50