PITTS CHALLENGER II BI-PLANE by INDY Hobby / ISC .. Has a SAITO 300 TWIN GOLDEN NIGHT. This Engine COST $1,050 NEW...65" Wingspan,has a Futaba S3302 1/4 scale servo on the rudder is a pull-pull..Futaba S3003 on the throttle,Has all the control arms and horns,Has a scale pilot.Has all the wing bolts and 4-40 screws for struts.The struts are socket fitted, they are slotted to fit over the mounts on the wing instead of just to one side..makes for a real clean look and easier to mount and stronger..Engine has not been started or flown.Plane in great condition and well built.,The wings are set up for a servo on each Aileron this will make a great sport or 3D plane with this set-up.

.What you will need to finish;;Two flex pipes / mufflers,spinner,prop,(4) servo's for Ailerons,(2) servo's for Elevator.fuel tank,fuel dot (filler).If any other infor or pic's needed reply to add..
..........WE can do just the engine for $599 engine NEW cost was $1,050............. or plane for $400.