I have a BJ Craft Nuance 70 that I'm about to fly. I used a Hacker 50 12s with 6s 5000 batteries.
Does anyone have any advice on the setup of a Nuance?

I'm currently practicing the Sportsman sequence (with another plane) and want to eventually compete.

Thanks!

Off hand I don't remember what I used but it didn't take a lot. Here is my build like thread and it might have something useful in it.

https://www.rcgroups.com/forums/show...ghts-and-build

I've since sold the plane but kind of miss it.. It was a great flying plane.

Best of luck.

I just test flew a biside 70 over the weekend. I used about 12 degrees on the ailerons with 20%expo and on the flying stab I used 1/2 inch up and down with 10% expo and all the rudder I could get with 20% expo.

If its anything like the biside expect the factory cg to be a little tailheavy but not unflyable. BJ likes his airplanes tailheavy.

Originally Posted by dw87

Off hand I don't remember what I used but it didn't take a lot. Here is my build like thread and it might have something useful in it.

https://www.rcgroups.com/forums/show...ghts-and-build

I've since sold the plane but kind of miss it.. It was a great flying plane.

Best of luck.

Thanks, actually, I studied that thread quite a bit!!