Originally Posted by MarksHangar

I like that Irish butter in the one pound blocks.

Whiskey flavor?

Originally Posted by jamesrxx951

It really depends. Is it the "real McCoy" popcorn or a fake clone of popcorn. And then what kind of butter. Clone butter, stinger butter, I can't believe it's not butter butter......it is endless on the combinations.

“Real” movie theater popcorn and butter, of course! 😎

Hello, I'm shopping for a 35cc rear exhaust and I'm a bit confused after reading this.
I already have 2 PTE36R and they run very well, I heard the RCGF,s they should run better than the DLE, s
Where can I buy an RCGF with confidence without getting a fake, clone, or a lemon?

What is the difference between the one with the straight spark plug and the heat plate in front of the exhaust from VVRC / Ibcinyou and the Stinger with the inclined spark plug from RCGFUSA?
Is one better, stronger or newer than the other?

With best regards
Fred

Fred:
I would ask your question under a different thread rather than resurrecting this flame war

Both VVRC and RCGF Stingers have good following, stand by their products and good customer service.

The issue of sourcing in china is still muddled (for us).

Regards,
Patrick

Yes there is lots of discussion on here about it, But basically RCGFUSA is the only place to buy an RCGF from as he is the Factory Authorized dealer and has the Name registered in the USA.

VVRC have there own line based on the RCGF Design from what i recall and at one point both engines came from the same factory. Not sure now tho.

Me Personally i would Stick with a DLE , as i have access to Plentiful parts and service availability ,depending where you live im sure the VVRC or RCGF will be fine options.

+1 To Opening a new thread.

Fred go to RCGF USA or Ibcinyou rc either one are great to deal with.Both have parts in stock and service. The best trouble free china engines I have ever used, As far as their 60 singles,nothing will touch them for smoothness and rpm.

We have been testing some of the new design Stinger engines, the 70 twin, 35 and now 10cc. The casting quality is excellent and they start and run very easily and smoothly. They are using Japanese bearings, a major Japanese auto company for pistons and real Walbro carburetors.
And from what I gather some of the newer designs are really really going to be great.

Originally Posted by FREDAV8TOR

Hello, I'm shopping for a 35cc rear exhaust and I'm a bit confused after reading this.
I already have 2 PTE36R and they run very well, I heard the RCGF,s they should run better than the DLE, s
Where can I buy an RCGF with confidence without getting a fake, clone, or a lemon?

What is the difference between the one with the straight spark plug and the heat plate in front of the exhaust from VVRC / Ibcinyou and the Stinger with the inclined spark plug from RCGFUSA?
Is one better, stronger or newer than the other?

With best regards
Fred

Hi Fred, I sent you a PM

If you want a Stinger engine go to RCGFUSA.com
If you want a VVRC engine go to Valleyviewrc.com

Originally Posted by denney47

If you want a Stinger engine go to RCGFUSA.com
If you want a VVRC engine go to Valleyviewrc.com

I suppose you left me out intentionally, all good Tom

Originally Posted by ibcinyourc

I suppose you left me out intentionally, all good Tom

Sorry Mike I didn't leave you out intentionally, you are a big seller of RCGF engines. I just mentioned the importers.
I hear good things about you.
Thanks
Tom

Originally Posted by ibcinyourc

I suppose you left me out intentionally, all good Tom

Got a link?

oooo

Originally Posted by tailskid2

Got a link?

Here you are:

https://www.ibcinyourc.com/

////TAKEN FROM THE OFFICIAL RCGF WEBSITE.http://www.rcgfservice.com. /////


RCGF Stinger engines vs. Old RCGF engines


Hello RCGF Friends and Family,

As most of you know, we at RCGF have been updating our entire engine line for almost two years now.

The new Stinger engine model is growing quickly. But recently we have had customers ask us about the difference between RCGF Stinger engines and the older RCGF engines that are popping up in both the US and China markets.

Because of these inquires we felt that it was important to share this information with the rest of you

First , we have redesigned everything about the New Stinger Engine.

We have made all new molds for these engines.

Unlike in years past, we now have complete control over the Stinger engine build from the mold, to parts production, to the completed engine.

Quality is our first order to produce the best product we can for our customers.

We're using a more robust metallurgy for our engine casting and a much stronger forged crank system with a higher quality bearing system to provide more power per cc, plus an all-around better looking engine.

Sadly there are still thousands of our old rejected engine parts floating around in China.

There are still people in China that are trying to ride our shirt tails by scabbing together engines from those old junk parts and sell them from China into the US market place.

Because of the complete lack of quality control in the phony RCGF engines, you stand a greater risk of getting a bad one and there are no spare parts to fix it when you need them. Because of all the bad press we were receiving, going all the way back to 2007, we made the hard decision to change our RCGF brand name to the Stinger brand name to distance our company from all the junk that was starting to show up in the market place.

Please be aware that the VVRC RCGF engines are not our engines.

They are made from those old parts we have been talking about and they are trying to mislead the customer.

As always you will get our 2-year warrantee on workmanship and materials for your Stinger engine and we have the spare parts and Service Center to back it up.

All of our New RCGF Stinger engines will be packaged with the Stinger logo on the box.