|
|
United States, MN, Henderson
Joined Nov 2016
16 Posts
|
|
|
|
|
|
I've used a pile of AR8000's in review models, no issues for years.
As for Lemon stuff, I wouldn't use it in anything that cost more than the receiver. |
|
|
United States, MN, Henderson
Joined Nov 2016
16 Posts
|
Maybe the review was from when they first released the ar8000. Thanks for the info. I will keep looking for a rx.
|
|
|
|
I do kit reviews, a couple dozen a year, I use 8000's all the time. Back then and currently as I swap equipment around all the time to accommodate publication schedules
|
|
|
United States, MN, Henderson
Joined Nov 2016
16 Posts
|
I just ordered a new AR8000 with sat and a remote receiver extension cable. It keeps up like this and I will have 1k into it..lol Okay that is an exaggeration..lol
Can't take it with you when you go anyway. |
|
|
United States, MN, Henderson
Joined Nov 2016
16 Posts
|
HELP!!!!!!
Okay, got new ar8000 installed. Bind works, ailerons work opposite of each other. Rudder works. Elevators both work but work like ailerons opposite of each other.
DX7s is not seeing the receiver as it is setup. Not showing Aux1, aux2 or aux3 on monitor screen. I am not able to mix or set master/slave, because aux1 through aux3 not visible as an option. Yesterday when doing setup of dx7s to ar8000 it did show the aux1 - aux3 on the setup screen and let me mix, but the elevators were not working correctly, so I reset the model and went to start over. Now no AUX1-AUX3 options showing. Today I set it up with what I have with no mixing. Monitor on DX7s shows Thr RAL Rel RUD GER LAL LEL Wing type set to dual ailerons and dual elevators Plugged battery in and bind. Ailerons work opposite of each other Elevators work opposite of each other so no lift just roll Rudder works as it should Am I suppose to use a Y cable for the Elevators to get them to work the same? Receiver is plugged in as follows: Bind plugged in bind/data Thr plugged in ESC Right Aileron plugged into AIL Right Elevator plugged in to ELE Rudder plugged into RUD Nothing plugged into GER Left Aileron plugged into AUX1 Left Elevator plugged into AUx2 Nothing plugged into AUX3 Did a firmware update to DX7s yesterday thinking this might resolve some issues, now at 1.03 Am I missing something here? This is getting frustrating to say the very least. Your assistance is appreciated. Ken |
|
|
|
Firmware only fixes bugs, you don't have a bug.
Like I told you on RCU, reverse the elevator servo thats moving the wrong way. If the result is they are both going the wrong way, reverse both. |
|
|
United States, MN, Henderson
Joined Nov 2016
16 Posts
|
I reversed the servo on the left elevator and took the mixing comletely out and now it works. Thanks for your help. Like I said on RCU.
|
|
|
|
Woot! My pleasure
|
|
|
Joined Dec 2023
1 Posts
|
Spectrum DX7 Rudder stick change
I’m using my Spectrum DX7 in my Ac 70 sailing yacht and want just 2 channels in use with throttle on left stick and rudder on right at the moment the rudder is only operating up and down on right stick instead of left to right ….how do I correct this please any help would be appreciated …..
|
|
|
|
You have it plugged into the wrong channel
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |