The Skywolf is set up for tow. It has the plywood bracket needed after the wing to accept the release. The stab is 1/2 thick and very rigid. I see no reason to add braces wires. This is a very strong tail.

The tail is Plenty strong enough for any abuse you want to throw at it . I have had Zero issues at all , and running a dle 55ra

Originally Posted by honzas

You can find some photos here :-)
https://www.flyinggiants.com/forums/...t=86844&page=7

Here are some more. I'm sorry but cant take rest of photos you would like to see now. Hope someone else helps.

Jan

Was that the DLE35RA?

Anyone fit a rear rudder servo, I have and I'm having clearance issues with the pushrod and the elevator. I've cut the control horn down but the rod is fouling against the elevator.

Ripped out the problem control horn and put a new one in a better location for a rear-mounted servo.

https://photos.google.com/photo/AF1QipPIlPjeScBz-
DzyRbTAEThE-DQdaoQhrd7394Jy

Some of the pics I took during the build (not finished yet)

What weight have your builds come out at? Mine has come in at 7.78 kg/17 lb and 2.4314 oz

Six flights on her now, rudder is extremely sensitive, don’t think 40deg of movement is needed. Two of the retaining brackets for the center section between the wings have now either broken or come loose. I’ve put a slightly taller u/c on and changed the prop to 22x10.

Overall it’s a great fun model, pity PilotRC have discontinued it.

Apparently it’s back. Both schemes in stock.
I like having different things so while everyone is buying bushmasters I’m considering this one.

Obviously a copy,I’m interested

A copy of what?

Originally Posted by Shepherdboy1

Obviously a copy,I’m interested

It’s been out for over 10 years… not a copy of anything