Originally Posted by 3DJP

Put the savox on your flaps.. use the 2 hitecs you have... one for throttle one for your air valve.. the Pro Modelers you mentioned are way overkill but its ok if thats what you wanna use.. you just dont need anything that strong or fast! For the ailerons, elevators, and rudder i would use something with about 150-200oz.. my go to for something like your plane would be the HiTec D645... metal gear HV capable popular 25 tooth spline and rite around 180oz. of torque and only 40 bux a shot..

Any particular reason to use the 5565s for light duty stuff? They have basically the same torque as the D645, but are just a tad faster.

Originally Posted by ululi1970

Any particular reason to use the 5565s for light duty stuff? They have basically the same torque as the D645, but are just a tad faster.

No you can use them all over the plane if you like... but they are 65ea thats all.. you can save a few bucks with the D645’s or fit it out with the 5565.. but they are pretty fast so you will have to ad a good amount of expo. Unless you are used to super touchy control surfaces.