Hi hi, ill start 1 soon for Max just waiting for plans from ChrisBchips

Won't be this weekend Devin, but i'll try and get a set together for you. For those of you wondering, its a foamy i've designed and buit recently. I've tried to encorporate alot of European F3P ideas i've seen into the foamy, for example, stepped leading edge, Elevtor doublers, sparless wing ect. Here is photo, sorry for the quality but it was takin with a camera phone:

Thats kind of funny. I'll post a picture of my "original design" later today. It is quite similar, SFG's and all!

Awesome Edge, look forward to seeing it.

nps chris, whenever is good, i bought the foam etc, recken 1 sheet will be enough?

Definately. Did you buy one sheet of each? 6 and 3mm?

Nah just the 6 should i get a 3?

You should get away with 6 all the way round. It'll proabably strengthen the fuse a bit better, but i wouldn't add any elevator doublers if you decide to use 6mm all the way round.

ok, ill grab a 3mil also, nothin wrong with leftovers!

like all the design issues - should fly good - show!!!!!

Originally Posted by chrisbchips

Awesome Edge, look forward to seeing it.

AHH Sorry. I was really busy with final exams. I left for vacation from school and forgot to take a picture. Its still in my dorm. It's pretty much identical but with a larger elevator and longer chord length on the fin. My friend says it looks like a fish! I even have thread bracing wires like yours too! Anyway, mine flew great, but I need to adjust the SFG's. There was some coupling with mine. I had MORE area under the wing to counteract all the fin and side area on the fuselage above the thrust line.
Anyway, sweet plane. I'll get pictures of mine when I get back if your still interested.

Interesting looking plane. I'm looking to put something llike this together in the near future. Can you share any details, servos, motor, esc, AUW and anything else you care to share.

Cheers,
Dave

my setup will be HS-55's all way round with a allign 400s outrunner hfs-05ms micro receiver and 7.4v 800 mah lipo

Hey guys, My setup uses HS-55's all round, AXI 2212/34, standard JR R700 FM reciever and a mgm compro 12 amp speed controler. AUW was 9 ounces, compared to the 14 ounces of my similar sized planes. I belive this is because it uses the rigging as a replacement for any spars. The plane flies great, without any twist in the fuse the roll rate is insane! The small elevator really allows the plane to tumble yet still flies precisely at higher speed with no hunting. The SFG's really imrpoved the knife-edge performance with no coupling as well as much more rudder power (knife edge loops with a 2 meter diameter!). I am really happy with this plane, it flies surprisingly well for such an ugly model!

hey chris, how did coolum go? and do u recken i can set this up with 1 aileron servo?, if not ill just go buy another hs55