Hello,
I been wanting to do a little research on the sabre 47 arf. and I 'd appreciate it if someone could post a link as to where I could find it. And what they think about the plane if the y have one.
Thanks
Mark

welcome to flying giants,, who makes this plane?? not sure what it is but im sure someone here will give them time.
mike

http://www.valuehobby.com/products.php?category_id=4

http://www.theprofilebrotherhood.com...er=asc&start=0

Thanks Chris appreciate it

no problem

I don't have this current ARF, but I had the last Sabre ARF. It was great. Currently, I'm flying a Sabre 47 kit. It's great as well. I've got another 2 kits in reserve and will be ordering this version of the ARF just as soon as I get the $ together. The designer has built the 1st ARF from this batch, with a Saito .82 and it came in less than 4 1/2 lbs.

Here's a picture of my current Sabre 47.....powered by a YS .63, Futaba 3010 servos, A123 battery.

i'm working on the manual now, if you need a manual wait, if you have done a profile before it's nothing you can't handle. Thanks
spaz

Here are some pics,

i used the included landing gear and wheels, the control horns and the throttle pushrod.. i did not use the included ball links and pushrods, i just didnt care for them.

I just finished the draft of the PDF manual, let me know what you think.
Thanks
spaz

BTW these have 12x1mm CF beams in them top and bottom longeron and the post behind the wing.. making them quite tough. here are some build pics from the factory.

I'm putting an OS 55AX on mine.

PS. This is my first post here :-)

Originally Posted by John Wells

I'm putting an OS 55AX on mine.

perfect, post some pics when you can

I would like to have a few more of these.

Originally Posted by Constrictor

I would like to have a few more of these.

you know you want to.. do it, do it..

Originally Posted by Constrictor

I would like to have a few more of these.

Cmon Steve, just get out the credit card and pull the trigger on 4 or 5 of them.