Nice looking Bling Are all of these new idems listed on the web site?

Planebender

Originally Posted by Azhar

Lets try this.....

Thanks!

One more thing to add....the Secraft Brushless Smoke Pump.

http://shop.aztechaeromodels.com/Sec...-AA-SE-SMK.htm

You are welcome Eric!

Originally Posted by planebender

Nice looking Bling Are all of these new idems listed on the web site?

Planebender

Yes

Originally Posted by Azhar

For those tired of stripping your nylon wing bolts, we now have a solution for you. Available for 1/4-20 and M6. The synthetic rubber will provide tension when tightened preventing any loosening.

http://shop.aztechaeromodels.com/Sec...AA-SE-WBLT.htm

I needed these this past weekend! lol

I will definitely be buying the wing screws and both cable devices. Over the Winter I will pull the rudder servo and send it in for service then reassemble with these. Azhar, what size (diameter) are the aluminum pins that go into the rudder horns? I think mine are 4-40 on my 104 inch AJS.

I think I want one of everything!

+1, Azhar has some of the nicest things on the market! Since Rcexl ignitions have just one piece of clear tape holding on the bottom cover, I put a wrap of fiber packing tape around it so the Velcro does not pull the cover off.

To redo my pull-pull, I would need 1 set of wire tensioners, easy couplers, and the wire?

The diameter is a hair over 3mm. I had yo ream it a little.

Originally Posted by ghoffman

I will definitely be buying the wing screws and both cable devices. Over the Winter I will pull the rudder servo and send it in for service then reassemble with these. Azhar, what size (diameter) are the aluminum pins that go into the rudder horns? I think mine are 4-40 on my 104 inch AJS.

Originally Posted by Azhar

The diameter is a hair over 3mm. I had to ream it a little.

Makes sense, 3mm is .118 inches and 4-40 is .112 inches.

Originally Posted by ghoffman

Makes sense, 3mm is .118 inches and 4-40 is .112 inches.

Is the hole in the ball/joint on the "Wire tensioners" also 3mm? ...

Originally Posted by tande

Is the hole in the ball/joint on the "Wire tensioners" also 3mm? ...

Yes

Do you have a pull-pull package deal where everything is included to save a couple of bucks?