Originally Posted by Sukhoikid

Just ordered my crack yak!

hahaha sucker

Originally Posted by lxcoupe

hahaha sucker

I just had to have something for the indoor event! Going to be building it over my spring break and flying the crap out of it at home.

Originally Posted by Sukhoikid

Good cause I wasn't going to let you fly mine. You tend to smack foamies full throttle in the pavement

Only yours

What size 3S are you guys using? Prop for 3S?

Thanks

Originally Posted by lxcoupe

hahaha sucker

We pulled it off lx sukhoikid,we started this thread just to get you to buy one of these.We heard they where crap,none of us actually bought one,we just pretended so you would REALLY order one
Jeff Sikkes

Originally Posted by Siko_Flyer

We pulled it off lx sukhoikid,we started this thread just to get you to buy one of these.We heard they where crap,none of us actually bought one,we just pretended so you would REALLY order one
Jeff Sikkes

Nah this thread didn't do it for me I actually saw one in person ha ha! But nice try though!!! ha ha!!!

Originally Posted by Siko_Flyer

We pulled it off lx sukhoikid,we started this thread just to get you to buy one of these.We heard they where crap,none of us actually bought one,we just pretended so you would REALLY order one
Jeff Sikkes

ROFLMAO

Anyone tried another prop besides the yellow ones? Mine doesn't fit the motor real well and it vibrates like crazy. It looks like the prop adapter is built into the motor so you can't change it.

Strange,mine fit good,but I did notice what appeared to be 2 adapters,not sure if that was what they were or how to use them because mine was ok.I used their power combo.
Jeff Sikes

Originally Posted by Jaybird

Anyone tried another prop besides the yellow ones? Mine doesn't fit the motor real well and it vibrates like crazy. It looks like the prop adapter is built into the motor so you can't change it.

try another prop. I bought 5 and the first one i put on was way off, the next one i tried worked fine.

I bought two and they were the same, well one was even worse. It fits perfect if you flip them over lol. The adapters won't fit either. They might fit an APC. I meant to pick up some GWS props at the LHS yesterday and forgot

If your motor came with 3 bands you'll have to use all three, I like one heavy duty band. It has to be pretty tight. I usually put the band on one screw, twist 180 then over the prop hub and twist 180 again before looping onto the other screw. It holds it very tight and creates a pivot point to allow the prop to bend in a crash.

Found some GWS 8x6 in my junk box. Works great and is virtually silent! I'll try the yellow ones with three bands and see how it works. I was running two.

Originally Posted by Jaybird

Found some GWS 8x6 in my junk box. Works great and is virtually silent! I'll try the yellow ones with three bands and see how it works. I was running two.

Did you balance the yellow prop?

Originally Posted by STLAV8R

Did you balance the yellow prop?

Balance wasn't the problem, the hole in the center of the prop is bigger than the adapter. It will probably be fine with heavy bands. But it's cool cause the GWS one matches the orange graphics