|
|
United States
Joined Nov 2017
392 Posts
|
No, not under load. Static it was 6.3 volts. Doing this by myself today didn’t render it possible. I am going to send it back and let tech aero evaluate it once I get in contact with them. I am satisfied that it was causing the issues. Having the interference and wot missing issues go away after all of the troubleshooting previously performed has me convinced, and happy.
|
|
|
||
|
Quote:
|
|
|
|
United States
Joined Nov 2017
392 Posts
|
|
|
|
|
Dan, from what I read on the EME manual, the ignition needs a minimum of 7.4v. TA makes a HV IBEC - is it possible you don't have enough voltage going into the ignition? I know you said you were running a 6v Nimh, but coming off a charger a 5 cell pack may be close to 7v. You might want to talk to Mike at Mile High.
|
|
|
|
Going back out today, try and get some video!
|
|
||
|
Quote:
There is a New updated model of this unit that is used by GP,DJ & Assume EME, It supposed to work fine at any voltage. |
|
|
|
|
Good Luck and let us know how you go
Have you tried just running a battery to the power in to the Ign to eliminate any possible fault of the Ibec etc? This way if the issue is still there is going to be Ign related. |
|
||
United States
Joined Nov 2017
392 Posts
|
Quote:
|
|
|
||
|
Quote:
So the extra is it Got it, Perfect you found the issue the Ta Ibec for what ever reason has gone bad Glade you got it sorted Now go fly the wings off the deacth lol, Well maybe not the wings hahaha |
|
|
||
United States
Joined Nov 2017
392 Posts
|
Quote:
Pic is from Mile High website. Mine installed is the same. |
|
|
|
|
|
|
|
United States
Joined Nov 2017
392 Posts
|
Maiden
Successful maiden yesterday! It was the perfect day, blue sky, wind 3/5 knots down the runway. Lifted off at half throttle, a couple clicks of up elevator and right aileron, and it was hands off. Flies very light with no surprises. Great airplane.
|
|
|
|
congrats on the maiden! I agree these planes fly great...and love mine, have many flights on it now.....easiest plane to hover! hahaha
|
|
|
Joined Jun 2021
4 Posts
|
Hi Guys
What engine size do you recommend to do some 3D flying and especially hovering? I plan to put the Xicoy X45 Turboprop (power like 70cc to 80cc) gas engine) in, turning a 24x10 3-blade propeller at 6000RPM. Watched most of the youtube films, the guys doing aerobatics mostly use 85 to 100 cc engines... Do you think this is enough or should i go with the 107 inch version? Best regards from Switzerland (sorry for the bad english...) Roman |
Currently Active Users Viewing This Thread: 3 (0 members and 3 guests) | |
Thread Tools | |