Hopefully next week I will be getting a call from QQ Aircraft company asking for the money to order the Generation III model of the 102" QQ Yak. I have called to reserve one.
Here is part of the setup that I have plan so far.
Engine: 3w100 regular mufflers for now (upgrade to cans this winter)
Servos: Hitec 5955 on the elevators. Unsure for wings and rudder.
Batteries: Unsure about this but really want to run 2 2200 Fromeco batteries.
Question I have a Bat Share from Smart-Fly. If I have that will I only need one regulator then for the two batteries???
I plan to use a PCM Futaba rx. with a futaba 9c radio.
I also plan to run sullivan smoke pump in it. I have match boxes already but thinking since I am going to be running fromeco batteries and hitec servos would I be better off just programing the servos with the programmer. Will keep ya updated on the progress. First I got to get it in.

Got an email today saying that mine will ship June 20th Today I order 2 2200 mah packs from fromeco and one regulator. I have one regulator already. I also order ignition cut off from smart-fly. Cant wait!

That's good news!

I am on the list as well. I just have to wait for an insurance claim (heavy shipping damage to my gen2).
I will be going with 5955's elev
2 5955,s rudder
5985's wings
Duralite power box 2 4300 rx 1 2800 ign
106cs 3w
pefa cans
PCM 649 Jr RX 9303 TX

Photos?

Here is a couple of pics of mine. I absolutely love mine! It flies 3D and IMAC sequences extremely well. BTW: The date on the first pic is wrong . . . it was a week ago . . .

Originally Posted by hillmanr2

I am on the list as well. I just have to wait for an insurance claim (heavy shipping damage to my gen2).
I will be going with 5955's elev
2 5955,s rudder
5985's wings
Duralite power box 2 4300 rx 1 2800 ign
106cs 3w
pefa cans
PCM 649 Jr RX 9303 TX

That setup should be sick. My friend has a Gen2 with a DA-100 and it's pretty good power. This plane on a 106CS should be a beast!

Originally Posted by Vic3D

That setup should be sick. My friend has a Gen2 with a DA-100 and it's pretty good power. This plane on a 106CS should be a beast!

106cs's are monsters on sd 35% yaks too

Originally Posted by Vic3D

That setup should be sick. My friend has a Gen2 with a DA-100 and it's pretty good power. This plane on a 106CS should be a beast!

Thanks, I am hoping to be able work on the side pulling stumps out of the ground

I'm getting mine this week. Can't wait, I feel it's the best all around and most competitive 35%er out there along with service that is second to none. Setup will be:
DA with cans
8611a's on ailerons and elevators
1 8711 on rudder
2.4 with AR 9000 / 2 remote receivers
Power Box Champion w/ lightened back plate (no match boxes and extra switches needed with power box)
2 Duralite 2150 2cells on Power Box
I'll post pics of the new updates as soon as I get it.

Lee

Have they improved the landing gear yet?

Originally Posted by Freddy Warbird

Have they improved the landing gear yet?

Yes the Gen II has a lot stiffer gear than the Gen I I have a Gen I with Gen II wings. The newer gear, however, is a pound heavier than the Gen I. I have yet to have problems with my gear and I have around 60 flights on mine. I am being gentle on my landings tho . . .

Mine came in at 26.5 lbs with a DA 100, and standard muffs, and it is plenty of power. I am putting cans in it this week - I will see if it adds any weight . . .

Seth

Would like to have one myself, please show pics when you get them. Hope the quality is as good as my AW QB series planes, I have spoken with the gang at QQ Aircraft and they assured me they were great, and I know that their CS is also great.

I plan to take lots of pictures. I wanted to get it ready for youth masters but I am not going to rush this airplane.

Just got an email. They said tomorrow or Monday they should be ready for shipping.