On the bright side, you can always get a refund or credit thru Amazon guaranteed......best of luck!

Originally Posted by Bunky F. Knuckle

I wouldnt buy a bottle of water off Amazon.

I gotta hear your reason for this.. ive bought miles of heatshrink snake skin wire loom servo end kits metric bolt kits paint epoxy prop balancers electronics led lights velcro double sided tape speciality tools and usually get it within a day or 2! Just sayin

I don’t like to buy from Amazon but many times they are the only logical source for things that are not readily available elsewhere. Same goes for Ebay and similar outlets. Sometimes I’ll do anything but argue with a local parts person / vendor then be told that what I want isn't avaulable.

I was able to find this site, but it is expensive. https://www.clipcarbono.com/en/100-c...-o-1000mm.html


I assume bi-directional fiber orientation is preferable for a wing tube. I found a unidirectional pultrude that looks OK, but not sure if it would be as good as this bi-directional fiber alignment

And this location as well, also expensive https://www.r-g.de/en/home.html

Originally Posted by shannah

Do you know a good source for metric sized cf wing tubes?

https://www.rockwestcomposites.com/s...ber-tubing?p=5

Www.rjxhobby.com

Surprised nobody mentioned Goodwinds. They have a metric button, and can do custom wraps (so they say).

https://goodwinds.com/carbon-fiberglass/carbon.html

Originally Posted by Zeeb

Thanks for the heads up Tom, you've always done a great job for me be it a wing tube or a new aluminum gear. I was only disappointed that you would not polish it for me but I understood your reasons.......

Zeeb, I can understand why he wouldn't polish your tube!