Falcon 30x13W......

PAU 32-3Db. Great prop for 3D work.

Originally Posted by BOSSIER_ROB

Well there has been some great new props developed since this thread started five years ago. I've been running a Falcon carbon 32-10 on my DA 150 since last season and couldn't be happier about switching my Mejzlik out for it. The Falcon has great vertical pull out. I can do snaps on an upline until I'm sick of them. It spools up insanely quick, too. They are very lightweight and cheaper than a Mejzlik. Hands down the best bang for the buck.

What prop did you have before the Falcon. I have a Aerotech Extra with a DA 150. It weighs 42 lb. I have a PT 30x12 on it now. What is the difference between the 32x10 and a 30x12. I want to get a falcon of Mejzilik. Just not sure on the one. I am starting to fly basic IMAC and I love 3d.

Originally Posted by probrodude

What prop did you have before the Falcon. I have a Aerotech Extra with a DA 150. It weighs 42 lb. I have a PT 30x12 on it now. What is the difference between the 32x10 and a 30x12. I want to get a falcon of Mejzilik. Just not sure on the one. I am starting to fly basic IMAC and I love 3d.

I used Mejzlik props before switching. I've switched back and forth with the 30x12 and 32x10. The 30x12 for IMAC and 32x10 for 3D/freestyle. When I switched to Falcon, I bolted a 32x10 on and never changed it. It wants to just start to rip when it unloads, but not to the point where it's obnoxious. Wide open on an upline, it doesn't rip and just keeps on pulling. Only when in level flight when it unloads. I never did try a 30x12. I didn't have a need to. I am pretty satisfied with the 32x10. I don't fly IMAC anymore, but wouldn't hesitate to use the same prop. I don't need more speed and like the better braking of a 32. The Falcon 32x10 will still spool up faster than a Mejzlik 30x12. If you want one prop for both IMAC and 3D, stick with a 32x10. You won't need the added speed until you get past intermediate. The Falcon is already going to give you a little more rpm and speed over a Mejzlik.

Originally Posted by BOSSIER_ROB

I used Mejzlik props before switching. I've switched back and forth with the 30x12 and 32x10. The 30x12 for IMAC and 32x10 for 3D/freestyle. When I switched to Falcon, I bolted a 32x10 on and never changed it. It wants to just start to rip when it unloads, but not to the point where it's obnoxious. Wide open on an upline, it doesn't rip and just keeps on pulling. Only when in level flight when it unloads. I never did try a 30x12. I didn't have a need to. I am pretty satisfied with the 32x10. I don't fly IMAC anymore, but wouldn't hesitate to use the same prop. I don't need more speed and like the better braking of a 32. The Falcon 32x10 will still spool up faster than a Mejzlik 30x12. If you want one prop for both IMAC and 3D, stick with a 32x10. You won't need the added speed until you get past intermediate. The Falcon is already going to give you a little more rpm and speed over a Mejzlik.

Couldnt have said it any better,put the falcon 32x10 on and you wont need another prop.

Mejzlik 30-12L end of story. Holy crap this thread is old.

Bob thanks for that excellent reply. You were very helpfully I my decision. I am going to order a 32x10 Falcon today. Thanks again.

Good job "BOB". Lol. I like the 3w-3d prop but it loads a 150 pretty heavily. I've had good luck with the vess 32-b and 32-c as well. Good luck

Originally Posted by probrodude

Bob thanks for that excellent reply. You were very helpfully I my decision. I am going to order a 32x10 Falcon today. Thanks again.

Anytime man. You'll like it. Give Bobs Hobby Center a call and they'll hook you up. Great folks over there and if you have any problems, they'll take good care of you.

Mejzlik 32 X 10 is a horrible match for the 150, I think it's to much prop for 3D flying. I have tried lots of props and my favorite is the Mejzlik 30 X 10. It spools up quick and spins around 6275-6300 on stock mufflers. Love this prop.
I recently purchased a falcon 31 X 10 but havn't tried it yet.

Vess

Originally Posted by jms5599

Mejzlik 32 X 10 is a horrible match for the 150, I think it's to much prop for 3D flying. I have tried lots of props and my favorite is the Mejzlik 30 X 10. It spools up quick and spins around 6275-6300 on stock mufflers. Love this prop.
I recently purchased a falcon 31 X 10 but havn't tried it yet.

THANK YOU. Finally someone who isnt recommending to much prop. I tried the 32x10, the Vess 32A, and the 30x10 worked best for me. I wish vess made 30" props. Love the Vess 27A on my DA100s

I'm with ya Joe. 27a on my da100 with stockers or re2's. On my 150 I prefer a mezzy 30-12L , it's on re3's too. Does both 3d and IMAC very well on this setup. Plane is 39 lbs and is a pilot 330s.

Originally Posted by jm_mac

Mejzlik 30-12L end of story. Holy crap this thread is old.

DING, DING, DING............

mejzlick 30-13 evo the best prop for IMAC and 3D

ZN LINE EXTRA 330 WITH DA150 (8 min 58 sec)