I have a 110 inch hangar 9 timber it has optional float mounts but I cant find anywhere in the manual what floats to use any help would be great on finding what floats to use

I assumed the old 1/4 scale Cub floats but I never looked into it

Sig makes a 1/4 scale float kit that's about $65. I built a set and use them on a hanger 9 super cub

Originally Posted by Ali Machinchy

We were looking at re introducing the Hangar 9 1/4 scale floats that went out of production when the vendor closed their doors.
I had a set made at a new factory and tested them with good results. The issue is getting them mass produced and at a cost where they are sellable?
I am still working on it, but no date in sight for them hitting the market. Sorry.
If you do manage to find an old set of the Hangar 9 floats out there. They should fit and work on the T110.

Regards Ali

see this

The H9 1/4 scale floats were 47.6" long per their manual.


I would make my own 48" floats from Seaplane Supply if it was me. They would be lighter and more durable in the end I would imagine. They are about $60, but you'll have to glass them and make your own struts at an added expense.
http://www.seaplanesupply.com/deep_v.html