Nice work guys

I got lazy and installed a servo for the choke

Gotta admit it's nice fliping a switch for the choke.

Hello,I'm trying to contact fergus to get a new prop hub for my GP61 for a few days and I can't get any answer on facebook or by mail,do anybody knows if he changed his adresses or if he is too busy to answer at the time
If i can't contact him,could ken crane sell one to me?

disregard,we just have a new importer in europe for the GP engines who told me that fergus is actually preparing the nuremberg expo,I will have a new hub through him,that will make our sales and after sales easier over there

Originally Posted by doubleloop

disregard,we just have a new importer in europe for the GP engines who told me that fergus is actually preparing the nuremberg expo,I will have a new hub through him,that will make our sales and after sales easier over there

R u sure that you sent right adress?
You can sent to ~t_c_lin@yahoo.com.tw
Or fergus@gp-engine.com

Originally Posted by Royster

Nice work guys

I got lazy and installed a servo for the choke

Gotta admit it's nice fliping a switch for the choke.

I love honesty- I did the same thing so I wouldn't have to bend down too far. Put it on the right rear slide switch.

Originally Posted by Zi-Chun Lin

R u sure that you sent right adress?
You can sent to ~t_c_lin@yahoo.com.tw
Or fergus@gp-engine.com

Pretty sure yes it's the adress I used to contact you earlier,I'm not on my computer now,I'll check tomorrow and try again on the ones you are giving,thank you

mail is gone to the 2 mails

I just ran and flew my frist GP 61 today and I have to say wow! I have a EF 88" edge 540 that I had a DA60 with a smooth pipe I though was really good. I have been talking to Dave Sullivan and he been telling me about the GP61 and how good of engine it was. I bought one from him and today I went out and flew the plane with the GP=61. I didn't change anything just unbolted the DA and bolted on the GP.
I flew the plane on the very first start . The throttle response was amazing and the Idle was smoother than the DA on the first flight. I was ripping a falcon 24-9 by the third flight. I had people coming up asking what engine I had in the plane because it sounded so good and the performance was outrageous. I have high hopes the as it breaks in it will only get better.
The GP -61 with a smooth pipe yanked my edge around like a rag doll, I'm a happy GP-61 owner.

Originally Posted by Rich B

I just ran and flew my frist GP 61 today and I have to say wow! I have a EF 88" edge 540 that I had a DA60 with a smooth pipe I though was really good. I have been talking to Dave Sullivan and he been telling me about the GP61 and how good of engine it was. I bought one from him and today I went out and flew the plane with the GP=61. I didn't change anything just unbolted the DA and bolted on the GP.
I flew the plane on the very first start . The throttle response was amazing and the Idle was smoother than the DA on the first flight. I was ripping a falcon 24-9 by the third flight. I had people coming up asking what engine I had in the plane because it sounded so good and the performance was outrageous. I have high hopes the as it breaks in it will only get better.
The GP -61 with a smooth pipe yanked my edge around like a rag doll, I'm a happy GP-61 owner.

I've got the same setup on my Yak. Ludicrous power. Dave is a great guy and he always takes care of his customers! I'm glad you like your GP.

Thanks a lot guys! Rich I'm glad you are enjoying the awesome power the 61 puts out. I stand behind everything I sell and my customers are my friends as well. Please let me know if you need anything.
Dennis, We missed you today at the field.

Two years old (serial #0003) and still running like a clock. Had a BME58 on ES Pipe in this airframe (92" Badan Vertigo kit) and performance was good at 16lbs.

This is the remainden with GP61 on canister with a Falcon 25x8W at 17lbs. Ballistic performance now

Go GP

Badan Vertigo2M GP61 on canister (7 min 59 sec)

Originally Posted by planebender

Thanks a lot guys! Rich I'm glad you are enjoying the awesome power the 61 puts out. I stand behind everything I sell and my customers are my friends as well. Please let me know if you need anything.
Dennis, We missed you today at the field.

Oh man, I wish I was out there. I ended up being really busy all day building a new plane (boo hoo) and I haven't paid my club dues yet! I'm sending in my application this week, so I'll be back in action when the weather improves. This weekend looks bad but hopefully soon we'll have some nice flying days!

Originally Posted by tbrum

Two years old (serial #0003) and still running like a clock. Had a BME58 on ES Pipe in this airframe (92" Badan Vertigo kit) and performance was good at 16lbs.

This is the remainden with GP61 on canister with a Falcon 25x8W at 17lbs. Ballistic performance now

Go GP

Badan Vertigo2M GP61 on canister - YouTube

That's ludicrous power.

To all our South African Customers - this year we have Fergus coming out here for an awesome event at Walker Bay Radio Flyers in Hermanus. Both Fergus and Martin Pickering will be at this event. Of course we will have a huge stand there with everything GP available on it. We look forward to seeing you there!!!!

I really like the looks of the Vertigo and its control surfaces. Looks to be a real floater too, been on their web site looking,might be my next build.Thanks for the video.