Originally Posted by drewbags

Excellent, what scheme?

Just back from a business trip so maybe I will get some more done over thenext couple of days. Still need some hardware for it.

This one.
Did you found a nice spinner in the boxes, or we need to order one?

Chris I will go with this setup:

DA-200L
2-into-1 headers and KS 95 Canisters
Propeller: Mejzlik CF - 32x10 L
Fuel Tank: 1.5L FIJI bottle with PSP cap and Fittings

Futaba 18MZ
1x PowerBox Royal - 7.0 V regulated
2x Futaba R7008SB (HV S.BUS2) Receivers
4x Futaba BLS157 HV on the stabs
3x Futaba BLS157 HV on the Rudder (pull/pull setup)
4x Futaba BLS157 HV on each wing - I will think about 4x vs 3x...
----------------8 x 513.9oz/in = 4111.2oz/in (296kg/cm) for the wing------------
1x BLS156 HV on the throttle
2x Futaba SBS-01T Telemetry Temperature Sensors
1x Futaba SBS-01RM Telemetry RPM Sensor
2x Duralite 7434m-PB (Li-MN 7.4V/4300mA)
1x Duralite 7524 (Li-Ion 7.4V/5200mA) for ignition
1x Smart-Fly cutoff

PowerBox Smokepump
White Rose 4 3/4 Wheels with 1/4" Titanium axles
Secraft Titanium Tailwheel
Servo Arms: Secraft 1.75" Aluminum

Originally Posted by vmatei

Chris I will go with this setup:

DA-200
2-into-1 headers and KS 95 Canisters
Propeller: Mejzlik CF - 32x10 L
Fuel Tank: 1.5L FIJI bottle with PSP cap and Fittings

Futaba 18MZ
1x PowerBox Royal - 7.0 V regulated
2x Futaba R7008SB (HV S.BUS2) Receivers
4x Futaba BLS157 HV on the stabs
2x Futaba BLS157 HV on the Rudder (push/pull setup)
4x Futaba BLS157 HV on each wing - I will think about 4x vs 3x...
----------------8 x 513.9oz/in = 4111.2oz/in (296kg/cm) for the wing; this is insane !!!------------
1x BLS451 on the throttle (??? very good servo but not HV)
1x S3051HV on the choke
2x Futaba SBS-01T Telemetry Temperature Sensors
1x Futaba SBS-01RM Telemetry RPM Sensor
2x Duralite 7434m-PB (Li-MN 7.4V/4300mA)
1x Duralite 7524 (Li-Ion 7.4V/5200mA) for ignition
1x Smart-Fly cutoff

PowerBox Smokepump
White Rose 4 3/4 Wheels with 1/4" Titanium axles
JJ TW-CF Tailwheel
Servo Arms: H9 Aluminum Sx Arm, 1.5" or/and SWB 2"

Please post build pics!!! Congrats on the Awesome plane

Originally Posted by vmatei

This one.
Did you found a nice spinner in the boxes, or we need to order one?

I love that scheme. I want one.

Will start the build again in about a week as I have some time off work then

It will be nice if Gernot Bruckmann joins the thread

Originally Posted by Andrew Bird

Snowflake - I think I'm on the same project as you at the moment, only mine's a total strip back and refinish job! Still a long way to go but I'll get there eventually.......

Anyway - enough 3W Yak's, back to Mr Drewbags' 330SC

You must be batching it Andrew. My wife would kill me if I brought a plane in the house. lol

That Krill is sweet! Sleepy asked if the servo tray for the rudder came with it? Looks like it does and it solved the problem of installing one during the build. Nice touch for sure. These planes are awesome and fly great. Will have to hit the lottery to get one of these. lol That DLE should give it plenty of power!

Yes the servo tray is built in with the included Bellcrank which is a nice touch They also sent me their new tank tray which fits to the wing tube.

Heres a few pics of my build thus far

I love the baffeling! What did you use for the backup material for the texalium??

Looks great

wow....!

sub'd

I see you got the 30x13 evo L for this bird. Nice job and love the way you are doing the air dams!

Craig, is one of our mater builders over here in the UK. Will be happy if I can match a few of his skills on mine.

Great job mate