From the picture on their website, it looks like the battery plugs into a small plug, not bullets. She pictures.

Originally Posted by gapple12

Anyone flying there 32" Edge EPP ? That is the one I'm ordering here soon. Looks very similar to the 3DHS Epp Edge, which flies awesome.

I'm flying the Twisted Hobbys Edge too.
Couldn't ask for a better flying foamy. Customer service is awesome too.

Originally Posted by 3daviator

I have the 32" Edge, I used the optional Landing gear and light kit. Flys outstanding! You'll luv it

That looks awesome, I WANT ONE !

Originally Posted by japan3d

From the picture on their website, it looks like the battery plugs into a small plug, not bullets. She pictures.

Sorry, You're right, I thought you meant the connectors btwn the esc and mtr. That's a JST plug and is the same type plug that comes on the TH and Gens Ace batteries. I'm using the Gens Ace so I used it as is.

Finished!

Which prop gives the best performance and run time?

I've flown it on both the 8x4.3 and the 9x4.7 I think I like the 9" better but either works fine. You'll get a little less flight time with the 9" Buy some of both and try them out.

And on 3S, 8/3.8.

lxcoupe I think you need to find a longer screw for your aileron control horn

Originally Posted by Bigugly

lxcoupe I think you need to find a longer screw for your aileron control horn

Ha....Haaaaa

I lost the other screw. I had 2 of those, the first one I cut down I screwed the threads up, so I was like screw it.

its amazing how those little screws run off and get lost.

Me too!!Just gotta change the esc power connector to a mini deans and set up my radio,should do the maiden tomorrow morning since I work nights and it's bed time.At least I don't have a 3" screw in mine
Jeff Sikes

Was gonna finish mine at the farm friday night but we got distracted drinking beer so I'll finish it tonight.

Originally Posted by Siko_Flyer

Me too!!Just gotta change the esc power connector to a mini deans and set up my radio,should do the maiden tomorrow morning since I work nights and it's bed time.At least I don't have a 3" screw in mine
Jeff Sikes

LOL, hey atleast I read the directions. Z-bends are at the wrong end on the ailerons

^ lmao.