I am looking to replace all my servo arm screws to hex head. I found the HITEC sizing but can not find anything on SAVOX. Using a couple of SC-0251MG's ?
thanks,
Ron

I believe Wrong Way RC has exactly what you need.

Thanks for the new supplier for me. Still not sure what the bolt size is though?

Take the screw to a hardware store and match it up to a nut. I'm sure it will be metric

http://www.espritmodel.com/servo-hor...set-m3-10.aspx

If you're asking the screw size of the Hitech servo screws, they are 2.6 mm x 80 mm. I got the socket head screws in all my servos & do not try to get by with 2.5 mm !! I think you can get them from McMasterCar !!

3mm by 6mm length.

Originally Posted by Bunky F. Knuckle

3mm by 6mm length.

Bunky, I bought a bunch of these screws years ago from J&W Hobby hardware & it says 2.6 X 8 mm, not 80, ha !! I know the 3mm will work but I was told 2.6 mm is what they really are ! Have to call Hitech again.
Thanks, John !

The 3mm (6mm length) are for Savox, XQ and Tactic (haven't tried them on Futaba or JR)

The 2.6 (8mm) are for Hitec

Hitec is 2.6, everything else is 3mm

Perfect! thanks men 3mm x 6mm it is...

Tables define metric bolts as M? Can anyone add to this for 3mm x 6mm Savox servo

M3x6mm

Thanks,
Ron

Hoping this will work. Not sure about thread count? M3 x .5 x 6mm?
http://www.microfasteners.com/scm300...ric-alloy.html