logo
Thread Tools
This thread is privately moderated by nzflyer21, who may elect to delete unwanted replies.
Old 07-30-2019, 11:26 PM
nzflyer21 is offline
Find More Posts by nzflyer21
nzflyer21
nzflyer21's Avatar
Joined Jun 2019
16 Posts
Discussion
More balsa bashing

Hello there once again, another wintery day outside so I headed into the garage for a wee while. Not to cold but a nasty wind blowing with snow falling further south of here.
I completed some further work at the rear of the fuselage in order to place the tail dragger on. Not to sure about doing what is set out on the plan, so I will have a good look at the full size and try to replicate that. Otherwise all is going well.
I made a start on the belly pan area which will be removable to get at the servo and radio gear. I have decided to build the structure in place to get a good fit. I very lightly CA ed the formers in place and will build up around that.
Also I have placed a couple of photos of how I splice my 1\4 X 1\4 stringers which I took of BUSA web video s. to get longer lengths. Probably not new you guys, but it was to me.
Well thanks for your interest regards Steve
nzflyer21 is offline Find More Posts by nzflyer21
Reply With Quote Quick reply to this message
Sign up now
to remove ads between posts


Quick Reply
Message:

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools