At long last the V2 60" Edge 540T EXPs have arrived! Probably the best airframe to learn the basics of 3D flight after a foamy, the Edge is easy and forgiving yet completely capable as your skills progress.
Long regarded as the best aircraft to learn the basics of 3D flying, the Edge 540T is very forgiving for novice 3D pilots yet fully capable as your skills progress. The Edge incorporates carbon fiber and G10 composites into the structure of the airframe, resulting in a lightweight, yet twist free structure capable of handling extreme aerodynamic loads. Carbon and G10 are used in high stress areas such as the landing gear mounting structure and fuselage longerons to provide enormous strength and durability.
The removable wing panels are mounted on a carbon fiber wing tube and are fastened to the fuselage with our new quick mount wing latch system. All control surfaces are pushrod driven with short linkages and use ball links for slop free actuation with no binding. Optional Side Force Generators are included and add to the already generous side area, increasing yaw axis authority and adding stability in all angles of sideslip. Expertly painted fiberglass cowl and wheel pants and 2 gorgeous high visibility Ultracote color schemes add the finishing touches and make this an airplane that you will be proud to show up at the flying field with. Couple the Edge with the Xpwr 22 and be prepared for ballistic vertical performance!
Last edited by Jim T. Graham; 09-22-2020 at 01:44 PM..
Thread Tools |
![]() |
|
|
As always.. great job Chris and the whole crew... having been part of the EF family for many years.. I've always marveled at Chris' dedication and drive and...just plane (see what I did there) excitement to keep pushing the boundaries of great flying arf's
|
![]() |
|
|
|
![]() |
|
|
correction
Sorry. Here's the right link..... http://docaustinextreme.blogspot.com...ht-review.html
|
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |