For almost fifteen years the PowerBox DigiSwitch has represented the standard for small to medium-sized models thanks to its compact format and versatility.
By using the latest components we have been able to reduce the size of the Digi-Switch V2 by about 20 %.
The introduction of a top-quality aluminium case, machined and anodised, has brought a substantial increase in the unit’s cooling efficiency, with the result that the maximum continuous current capacity of the PowerBox DigiSwitch V2 is around 20 % higher. In fact, the peak load capacity is twice as high: the DigiSwitch V2 can handle more than 10 A for several seconds!
Powerbox Digi Switch V2 (4 min 43 sec) |
The DigiSwitch V2 offers four user-selectable output voltages: for normal servos it can be set to a regulated 6.0 V, regulated voltages of 7.0 V and 7.6 V are available for HV servos, as is an option for non-regulated voltage.
Power to the unit can be drawn from four different battery types: LiPo, LiIon, LiFePo, NiMH. Ultra-bright RGB LEDs are fitted to indicate battery voltage; they light up in various colours to display the charge status of the batteries.
CORE users also benefit from one special additional feature: the battery voltage and regulator voltage can be displayed directly at the transmitter via telemetry!
Last edited by Jim T. Graham; 03-23-2021 at 09:37 AM..
Thread Tools |
![]() |
|
|
Will it work with a standard reciever too or ??
|
![]() |
|
|
Can you plug it into like a spectrum power safe reciever will it work ?
|
![]() |
|
|
Powersafe no.
Any regular receiver, yes. |
Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
Thread Tools | |